Maybe this time you have a headache with the basement floor, you think to how to waterproof a basement. But you do not worry we will give you a precise and easy solution to solve the problem of leakage on the floor your basement walls. The leak was caused by the leakage of water from the soil, if left over time you will be inundated basement room with water. Therefore, anticipation of soon doing now to prevent flooding in your basement room. If you are bothered by leakage or see pae through basement floors or walls, the problem can be solved. However, it takes time and effort, and you have to do the job right, thorough, and precise.
There are three basic causes of seepage and cracks in the basement. And we will answer how to waterproof a basement. First, at the time of granting foundation construction stage may not work correctly and carefully, or it could be the foundation of any material provision does not have good quality. Supposedly for your basement floor to the foundation provide a waterproof foundation. Second, the house may have been resolved, but in the end lead to cracking, either on the floor or on the wall. Finally, the water pressure from outside might have been not strong enough to withstand and ultimately forcing the water out through the wall. Leaks are easy to detect. The water will begin to seep through the floor area or wall cracks.
How to waterproof a basement to answer, we will be a little give these tips for you. If there are no holes or cracks in basement walls, you can apply a waterproofing compound directly into the wall. However, if almost all basement leakage is caused by either cracks or holes in walls or floors, the first step that must be done is to the wall or floor must be repaired before waterproofing is applied. To be a good result can be durable and last a long time. You can usually fill in the cracks with regular waterproofing mix. However, if the crack is large, the walls were cracked and patched should be cleaned thoroughly before you apply the waterproof mix.
If water seeps through the walls you can sews special epoxy and latex cement formulas or hidrolix to patch crack by way inserted into the slit experiencing severe crack to how to waterproof a basement. Do not forget to wear gloves to protect your hands, this is highly recommended because this material contains a compound that is very harmful for your skin. The latter stages of repair seepage is apply some muriatic acid using fluffy brush stiff, then this material will remove any salt deposits that bond stone to better paint the walls. Using a stiff brush hairy allow the first coat of paint that will work into the pores of the stone. A second layer is applied with a high roller will ensure effective waterproofing